Roofing tube, PA

  • 500 бр
  • 1000 бр
Clear
275.06 BGN471.34 BGN

Polyamide tubes are suitable both for metal screws with a diameter of 4.8 mm and for concrete screws with a diameter of 6.3 mm. They are made of polyamide, a material that is rightfully considered the most durable in construction. These tubes are chosen when the object requires the coverage of the highest standard.

A mechanical system with a plastic tube and metal screw allows cheaper installation by choosing a longer tube and a shorter screw, because plastic is usually cheaper than metal. The use of plastic at the same time breaks the thermal bridge through the thermal insulation created by the fastener and thus saves energy in the lifespan of the building. What is more, between the tube and the screw there are certain moving when the tube is pressed down. This is so called “telescopic effect”. Thus, the tube “sinks” into the thermal insulation when someone steps on and the screw head does not pierce the membrane. The softer the mineral wool is, the shorter the tube should be. 20% shorter tube puts us on the safe side.

By installation someone should make sure himself that the head of the tube is flat to the surface and not coned inwards. Beware: even a small dent in the center of the tube down could show a significant run-out of the bearing capacity of the connection!

Certificates

CE
ЕТА 06/0007
FM

Images

Related products

Concrete drill bit

Fast drilling due to flute design

Stress plate, oval, universal, 82/40 мм

For fixing synthetic roof membranes over soft or hard base

Roofing screw for metal base 4,8 mm

Roofing screw for stress plates, bars, PP or PA tubes

Roofing screw for concrete base, 6,3 mm

Roofing screw for stress plates, bars, PP or PA tubes  

Stress plate, round Ф40 mm

For fixing synthetic roof membranes over soft or hard base

Drive bit Torx (T25 or Т30)

Drive bit Torx for better grip on the screw

Stress plate, oval, 82/40 мм

For fixing synthetic roof membranes over a soft base